 |
mem-140 STATIC CYCLE EXERCISER |
Ruggedly built tubular steel frame stands solidily on four rubber tipped properly balanced legs. Provided with adjustable standard cycle seat and specially designed adjustable handle. Fitted with one hard rubber tyred cycle wheel and standard chain and sprocket for bicycle drive. Comes with chrome plated wing nut, pressure rod and ball bearing resistance roller which permits controlled variation in ridding effort.
Odometer shows speed and kilometer done. Oven baked finish with working parts finish with chrome plating.
|
 |
CYCLE ERGOCISER, Semi-Recumbent |
The adjustable semi-recumbent ergociser provides a biomechanical seat for those patients requiring back support & reduced gluteal pressure. The sturdy, heavy duty frame with powder coated finsh and non-friction magnetic resistance system provides smoothness, durability and runs virtually silent.
|
 |
mem-142 PED-O-CYCLE |
Tubular steel construction, fitted with resistance control device. For reactivation and mobilization of the joints and for strengthening the leg muscles.
Suitable for patient unable to sit on a regular exercise bicycle.
|
|
mem-144 ACTIVATOR |
A unique exerciser for the lower and upper extremities. The pedaling movement can be carried out by either Arms or Legs. It can be fixed & adjusted in matter of seconds to limb size & to the degree of flexion or extension.
The fully chrome plated unit with adjustable resistance is very light & easily portable and can be attached to any tubular chair, wheel chair or bed.
|
 |
mem-145 LEG EXERCISER |
Tubular steel constructed unit is without resistance mechanism. Suitable for leg exercises with free paddeling movement for patients unable to sit on a regular exercise bicycle.
Stove enameled finish.
|
|
mem-146 QUADRICEPS EXERCISE TABLE |
Designed for effective administration of progressive resistance exercise to the knee joints muscle groups. Both Quadriceps and Hamstrings can be exercised with out changing the position of the patients. Resistance bar is caliberated so that resistance can be varied from 1/2 and 3/4 and maximum without adding weight, the unit consists of foam padded seat with padded back rest.
Table size 70cm x80cm x120cm high.
The torque unit consists of two lever arms one of which hold the weight while the other provide contact with the patient. The exercising of the opposite leg is done by the lifting of the torque unit from its bracket and placing it on the other end of the table.By changing angle between the two arms, maximum or minimum resistance can be given at any point in the range. Comes with 6kg weights.
|
|
